iSCADA

为您的项目的嵌入式Linux硬件

我们的目标是为您的项目提供嵌入式硬件软件支持。这样你就可以从原型到启动,把你的项目投入生产。

iSCADA

高性能数据采集

SCADA基于Linux的嵌入板,以很小的规格提供实时表现。被TI ARM cortex-A8 1-Ghz处理器锚定,SCADA把RS232/串行接口(2)、RS485(2)接口、CAN接口、LTE猫、WIFI、以太网(Ethernet)、eMMC、SD卡、USB(2)、512MB SRAM、1024K烧录器(eprom)、12C、SPI、8 LED’s、4 switch及20 GPIO’s集中在面板上。

提供了一整套API来保证项目快速建立。这款产品为服务汽车、电信、媒体、远程自动化、工业控制等行业的客户而设计.

我们专注以下产品:

TI Sitara,sitara处理器,单板计算机,SCADA工业硬件,Quectel LTE猫,嵌入式项目,工业迷你个人电脑,sitara ARM cortex处理器,单板计算机,SCADA设备,评估板, RS485, RS232, CAN, linux板,RS232工业硬件,工业计算机,gnu嵌入式臂工具链,FreeRTOS,  fanless CPU,潜入式项目SCADA,嵌入式数据收集,嵌入Beaglebone black, ARM处理器,ARM CPU, arm gcc 编程, arm gcc, ARM cortex A8 CAN, Arm芯片集,A8处理器, cubox I, IMX6, IMX8, 以及Raspberry pi。

Key Features:

CPU:

  • Texas Instruments TI sitara AM335X.
  • High Performance with 1GHz Cortex-A8.
  • PowerVR SGX530 Graphics core.
  • 512MB DDR3 RAM.
  • 4GB eMMC memory and SD card slot.

Networking:

  • Wireless connectivity: Wi-Fi: 802.11 b/g/n.
  • 10/100Mbps Ethernet.
  • LTE Modem for various regions.
  • LoRa supported Bands 868 , 915 , 433 MHz

Peripheral interfaces:

  • 2 × 12-bit SAR ADC
  • 1 × SPI
  • 1 × I²C interfaces
  • 1 × CAN
  • 25 × GPIO pins
  • 2 × Timer/Counter
  • 1 × RESET, WakeUp

Serial Interface:

  • 2 × RS232.
  • 2 × RS485.

Cryptographic hardware acceleration:

  • AES, SHA-2, RSA, elliptic curve cryptography (ECC), random number generator (RNG)

Power management:

  • Internal low-dropout regulator
  • Individual power domain for RTC
  • 5uA deep sleep current
  • Wake up from GPIO interrupt, timer.

Display Resolution:

  • Resolution 1400 × 1050 × 24 bpp
  • LCD interface Parallel RGB 24 bit.
  • 4/5 wire resistive touch panel

USB:

  • 1 × USB Host
  • 2 × USB OTG

Software Update:

  • Over The Air software can be update via wifi, LTE modem, Ethernet.

Dimensions (W × L × H):

  • 110 mm x 100 mm x 39 mm

OS support:

  • Linux Arago

EFB-REV1 IoT

Overview:

The EFB-REV1 boots up in less than 200ms. runs on FreeRTOS Provides a powerful and flexible selection across the full spectrum of applications.Built in LoRa module suits it perfect for application like Smart metering, Smart lighting, Smart home, Smart Energy, Automation and Industrial solution. Documentation hardware/software customisation completely supported by our team. Power supply and USB cable provide along with the box for debugging.

A rich set of API is provided for quick project startup. This product is designed to serve clients in the fields of automotive, telecom, medical, remote automation, and industrial control.

Key Features:

CPU:

  • Xtensa dual-core 32-bit LX6 microprocessor, operating at 240 MHz
  • Performing at up to 600 DMIPS.
  • 520 KiB SRAM.
  • 4MB Flash memory

Networking:

  • Wireless connectivity: Wi-Fi: 802.11 b/g/n.
  • font-size: 1rem;”>Bluetooth v4.2 BR/EDR and BLE
  • LoRa supported Bands 868 , 915 , 433 MHz

Peripheral interfaces:

  • 12-bit SAR ADC up to 12 channels
  • 2 × 8-bit DACs
  • 1 × I²C interfaces
  • 2 × UART
  • 20 × GPIO pins

Performance:

  • Data transfer rates Upto 300kb/s using LoRa communication.

Cryptographic hardware acceleration:

  • AES, SHA-2, RSA, elliptic curve cryptography (ECC), random number generator (RNG)

Power management:

  • Internal low-dropout regulator
  • Individual power domain for RTC
  • 5uA deep sleep current
  • Wake up from GPIO interrupt, timer, ADC measurements

Sensor connectivity:

  • Maximum 6 Analog sensors can be connected with total load of 880mA.

Software Update:

  • Over The Air software can be update via wifi or Bluetooth.

Dimensions (W × L × H):

  • 75 mm x 75 mm x 32 mm

OS support:

  • FreeRTOS

ELB-REV4 iSCADA webPanel SOFTWARE

  • SCADA powers with 5V 2A DC power supply.
  • A webPanel Desktop application that monitors the iSCADA device
  • For Modem to work make sure SIM PIN is disabled.
  • SIM Card can only be ejected by pressing the SIM eject button.
  • RS485 and RS232 are industrial purpose ports.
  • Mini USB port is only used to collect log messages